{"product_id":"black-ops-auto-works-cfr-carbon-fiber-hood-2011-2021-jeep-grand-cherokee-wk2","title":"Black Ops Auto Works CFR Carbon Fiber Hood - 2011-2021 Jeep Grand Cherokee WK2","description":"\u003ch4\u003eCFR Vented Carbon Fiber Hood for the 2011-2021 Jeep Grand Cherokee WK2\u003c\/h4\u003e\n\u003cp\u003eThe CFR hood replaces the factory aluminum panel on the 2011-2021 Grand Cherokee WK2 with a hand laid composite panel that carries integrated cooling vents over the engine bay. It is built in the United States in 2x2 twill carbon fiber over a reinforced laminate, sealed with a UV stable clear gel coat, and it bolts to the original hinges, latch striker and D-ring catch.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIntegrated hood vents move hot air out of the engine bay under load\u003c\/li\u003e\n\u003cli\u003e2x2 twill carbon fiber outer skin finished in a UV stable clear gel coat\u003c\/li\u003e\n\u003cli\u003eLighter than the factory aluminum hood, which takes weight off the front axle\u003c\/li\u003e\n\u003cli\u003eBolts to the factory hinges, latch striker and D-ring catch with no cutting\u003c\/li\u003e\n\u003cli\u003eOffered as full fiberglass, carbon outer with fiberglass inner, or full carbon fiber\u003c\/li\u003e\n\u003cli\u003eWeather resistant aluminum mesh backs the vent openings where applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrims Covered\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2021\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eGrand Cherokee (WK2)\u003c\/td\u003e\n\u003ctd\u003eLaredo, Limited, Overland, Summit, SRT, Trackhawk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eEcoDiesel equipped Grand Cherokee models are not covered because of the different underhood packaging. The hood mounts to the factory hinges, latch and D-ring, which transfer from the original hood. Hood pins are not supplied with the panel.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart numbers\u003c\/td\u003e\n\u003ctd\u003eBOAW-HD11JPGC-CFRF, BOAW-HD11JPGC-CFRFC, BOAW-HD11JPGC-CFRC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfigurations\u003c\/td\u003e\n\u003ctd\u003eFull fiberglass, carbon outer with fiberglass inner, full carbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter skin\u003c\/td\u003e\n\u003ctd\u003e2x2 twill carbon fiber weave on carbon configurations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eUV stable clear gel coat on carbon, black gel coat on fiberglass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVenting\u003c\/td\u003e\n\u003ctd\u003eMoulded hood vents with aluminum mesh backing where applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFactory hinges, latch striker and D-ring catch transfer from the original hood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited one year warranty against manufacturing defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne CFR hood panel in the selected configuration\u003c\/li\u003e\n\u003cli\u003eAluminum mesh vent screen where the selected configuration uses it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Black Ops Auto Works\u003c\/h4\u003e\u003cp\u003eBlack Ops Auto Works designs and hand builds composite body panels for the Jeep Grand Cherokee WK2 platform in the United States, using carbon fiber and fiberglass laminates finished in UV stable gel coat so each panel mounts to the factory hinges and latch without cutting the vehicle.\u003c\/p\u003e\n\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blackopsautoworks.com\/products\/jeep-grand-cherokee-carbon-fiber-sniper-hood\"\u003eJeep Grand Cherokee Carbon Fiber Sniper Hood\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blackopsautoworks.com\/products\/2011-2021-jeep-grand-cherokee-demon-hood\"\u003e2011-2021 Jeep Grand Cherokee Demon Hood\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blackopsautoworks.com\/products\/2011-2021-jeep-grand-cherokee-carbon-fiber-red-eye-hood\"\u003e2011-2021 Jeep Grand Cherokee Red Eye Hood\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eDoes this hood fit a Grand Cherokee that is not an SRT or Trackhawk?\u003c\/strong\u003e\u003cp\u003eYes. The panel uses the shared WK2 hood opening, so Laredo, Limited, Overland and Summit models mount it the same way as the SRT and Trackhawk. EcoDiesel models are the exception.\u003c\/p\u003e\u003cstrong\u003eDo I need to buy anything before the hood can be installed?\u003c\/strong\u003e\u003cp\u003eThe panel reuses the factory hinges, latch striker, D-ring catch and weather stripping from the original hood, so those parts transfer over. Paint is required on the fiberglass configuration.\u003c\/p\u003e\u003cstrong\u003eIs a fiberglass hood finished when it arrives?\u003c\/strong\u003e\u003cp\u003eNo. The fiberglass version arrives in gel coat and is intended to be primed and painted or wrapped to match the vehicle before it goes on the car.\u003c\/p\u003e\u003cstrong\u003eHow is the carbon version protected from sun damage?\u003c\/strong\u003e\u003cp\u003eThe exposed weave is sealed under a UV stable gel coat that is buffed to a gloss. It resists yellowing and can be wet sanded and polished again later if it picks up swirls.\u003c\/p\u003e\u003cstrong\u003eWill the factory hood struts still hold the panel up?\u003c\/strong\u003e\u003cp\u003eThe composite panel is lighter than the aluminum original, so the factory struts can push it past the intended stop. A prop rod is the safer option when the struts are reused.\u003c\/p\u003e\u003cstrong\u003eAre hood pins required?\u003c\/strong\u003e\u003cp\u003ePins are recommended as a secondary restraint on a lightweight composite panel. They supplement the factory latch and D-ring rather than replace it.\u003c\/p\u003e\u003cstrong\u003eCan the panel be repaired if it is chipped?\u003c\/strong\u003e\u003cp\u003eGel coat damage is repairable. Light marks can be wet sanded and buffed, and deeper chips can be filled with gel coat and blended before polishing.\u003c\/p\u003e\u003cstrong\u003eHow should the finish be maintained?\u003c\/strong\u003e\u003cp\u003eWash with a pH neutral soap and protect the surface with a carnauba wax, ceramic coating or clear film. Avoid abrasive polishes on the weave itself.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003ePark on level ground, open the factory hood and support it, then disconnect the battery if underhood lighting will be added later.\u003c\/li\u003e\n\u003cli\u003eRemove the washer nozzle lines, insulation pad and any factory vents from the original hood and set the hardware aside for reuse.\u003c\/li\u003e\n\u003cli\u003eUnbolt the hood struts or prop rod, then support the hood with a second person before removing the hinge bolts.\u003c\/li\u003e\n\u003cli\u003eLift the original hood clear of the vehicle and transfer the hinges, latch striker, D-ring catch and weather stripping to the new panel.\u003c\/li\u003e\n\u003cli\u003eSet the new hood loosely onto the hinges and start every bolt by hand so the panel can still float during alignment.\u003c\/li\u003e\n\u003cli\u003eAlign the panel to the fenders and headlights, checking the gap on both sides before torquing the hinge bolts.\u003c\/li\u003e\n\u003cli\u003eAdjust the rubber bump stops and the D-ring catch height so the hood sits flush and does not bounce at speed.\u003c\/li\u003e\n\u003cli\u003eClose the hood slowly with a palm over each headlight, confirm latch engagement, then recheck all fasteners after the first drive.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Black Ops Auto Works","offers":[{"title":"Fiberglass","offer_id":55031834378453,"sku":"BOAW-HD11JPGC-CFRF","price":1549.0,"currency_code":"USD","in_stock":true},{"title":"Fiberglass Inner \/ Carbon Fiber Outer","offer_id":55031834411221,"sku":"BOAW-HD11JPGC-CFRFC","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"Carbon Fiber","offer_id":55031834443989,"sku":"BOAW-HD11JPGC-CFRC","price":2549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/5179\/6437\/files\/jeep-grand-cherokee-wk2-cfr-carbon-hood-camo-render-front.jpg?v=1790125449","url":"https:\/\/geniusloci.app\/de\/products\/black-ops-auto-works-cfr-carbon-fiber-hood-2011-2021-jeep-grand-cherokee-wk2","provider":"Genius Loci","version":"1.0","type":"link"}